Fotokopi iR2230 Sering Jamps di Fixing

Punya fotokopi tanpa bisa memperbaiki adalah hal yang kurang baik.

Nah kali ini aku akan sharing bagi pemilik fotokopi canon iR2230, iR2270 dan yang sejenisnya.
(Series 30 dan 70).

Jenis Kerusakan:
Kertas jamps di daerah fixing/pemanas.
Letaknya sebelah kanan dari mesin fotokopi.

Analisa:
Hal ini disebabkan karena ada 2 sebab.
1. Fixing film kurang pelumas.
Minyak pelumas habis karena termakan panas fixing.
2. Roll delivery kurang maksimal kerjanya.
Ini berkaitan dengan tutup kuning yang ada di daerah fixing.
Per tension yang ada di roll tersebut kendur.

Pemecahan masalah:
Masalah 1.
Fixing film tak bisa berputar sebagaimana mestinya.
Caranya perbaikannya cukup mudah.
Kita tinggal copot filmnya kemudian berilah pelumas di daerah dalamnya film.

Masalah 2.
Per tension di roll delivery kendur.
Caranya ya harus kita lepas fixing filmnya kemudian lepas pernya.
Setelah itu tarik atau kencangkan pernya tadi.

Untuk detail pelepasan part per part di daerah fixing terlalu sulit untuk ditulis apalagi kalau tanpa gambar akan sulit untuk dimengerti.
Jadi ya maaf.
Insya Allah akan aku buat lebih jelas lain waktu.
Share:

Detecting Error E007 for iR2270/iR2870/iR3570/iR4570/iR3530

Detecting Error E007 at canon copier iR2270, iR2870, iR3570, iR4570, iR3530.

As part of its protective mechanism, the machine checks for the following error conditions.

Error Code:
E007

Detail:
0000

Sympton:
The fixing film rotates in an abnormal way.

Description:
The reading of the main thermistor is in excess of 100 deg C with the fixing motor in a locked state and in addition, the machine fails to detect the marker signal for 6 second.
Share:

Making Initial Checks | Site Environment Photocopy

There must be a source of power whose voltage is as specified +/- 10 %.
The power plug must never be disconnected day and night.

The machine must not be in an area subject to high humidity, near a water faucet, water boiler, humidifier.
The site must not be cold or subject to dust.
The machine must not be near a source of fire.

The site must not be subject to ammonium gas.

The machine must not be exposed to the rays of the sun.
As necessary, curtains must be provided.

The area must be well ventilated.
The machine must be on a level floor.

In addition, be sure that there is a source of power that can be used by the machine at all times.
Share:

Cassette PickUp Unit 70 Series

The paper inside the cassette is held up by the lifter plate.
When pickup takes places, the pickup roller moves down to come into contact with the surface of paper.

The pickup roller is moved down when the pickup solenoid is goes ON.
The feed roller and the separation roller serve to make sure that a single sheet of paper is moved to the feed path.

And the paper is moved as far as the registration roller by the work of vertical path roller.

The pickup vertical path roller, pickup roller, feed roller and separation roller are driven by the cassette pickup motor.

Part of Cassette Pickup Unit:
Cassette paper sensor.
Pickup roller.
Feed roller.
Separation roller.
Pickup vertical path roller.
Cassette retry paper sensor.
Vertical path guide.
Lower right cover.
Holding plate.
Lifter plate.
Share:

Detecting an Error E000

Detecting an error E000.
Error code is E000, detail code 0000.

Symptom is fixing temperature fails to increase.

Description:
In the course of start-up control, the thermistor reading is less than 30 deg C 1 sec after the start of power supply or is less than 70 deg C 2 sec after the start of power supply.

The machine will identify an error condition if any of the foregoing continues for 200 msec or more.
Share:

Points to Note About Turning Off the Main Power Switch

Points to Note About Turning Off the Main Power Switch.

Before turning off the main power switch, you must first press the control panel power switch.

When the printer unit is in operation or Fax is being received, check to be sure that the Execute / memory lamp on the control panel is off.

Otherwise, the data being processed may be lost.
Share: